Xinglong Xg Series Open Hopper Mono Screw Pump Used in Tomato Ketchup/Mayonnaise Processing
Quick Details Specifications
1. especially for highly viscous medium
2. with CE, ISO certificates
3. high quality and competitive price
4. prompt delivery
Xinglong open hopper single screw pump used in tomato ketchup/mayonnaise processing
XG-N-Z, XL-N-Z series
Like Netzsch NM-SF, NM-BF series
NS, NES, NES A, NUS series
1. Abstract:
The main raw materials for mayonnaise are mainly vinegar, oil, water, season, starch and fresh egg yolk. We know every kind of materials has its own period of guaranteeing quality, so in addition to the conveying according to the correct proportion, the simplicity and convenience of the process is also very important. Our hygienic screw pump can fully convey all the above media. Because of its pin connection, therefore no lubricant is required, and the efficiency of conveyance is greatly improved. All the parts passed by the media are all made of stainless steels, the polishing degrees all conform to hygienic standards, and mechanical seals of food stage are also equipped. The pressure of each stage of the pumps is no higher than 4 bars, the slip velocity is under 1.5m/s, and the flow rates of the media can be adjusted by regulating the rotation speed. This not only reaches precise feeding, but also guarantees the stable and cutting-free delivery.
The previous processes of tomato are similar to the mayonnaise, it is also applying our screw pumps to convey sugar solution, seasoning and starch in accordance with certain proportion into a container for tomato sauce, and a small quantity of salt is added in for increasing the time of guaranteeing quality. The difference between them is that the tomato sauce should be feeded into a heat exchanger for steaming and boiling. Our screw pumps will be applied in this process, but different models of pumps will be used before and after heating process. The temperatures of the media out from the heater are up to 60-70, it should be considered that the high temperature will lead the stator expanding, therefore our screw pump with the same model but a rotor with a smaller diameter can satisfy the requirement.
2.Material:
(1). Stator: eg, NR,NBR, EPDM, PTFE, VITON(FPM) and other special rubber, eg, anti-abrasive rubber and anti-oil rubber.
(2). Rotor: carbon steel, 304/316/904 stainless steel, ceramic, stainless iron, duplex stainless steel and so on to meet all your requirements.
(3). Body: carbon steel, 304/316/904 stainless steel and so on.
3. Parameters:
(1). Capacity: up to 50m3/h
(2). Discharge pressure: 0~2.4MPa or higher.
(3). Viscosity: up to 1x106cSt
(4). PH: 0~14
(5). Temp: -10~150
(6). Solid content: up to 60%
(7). Fiber length: 0~260mm
(8). Motor power: up to 75 kW
4.Inner stucture:
Pump Photos:
Audited Supplier 
){kind=link}
){kind=link}